Gilbert Metal Stair Railing Contractor – Custom Indoor And Outdoor Railings Stair Builder

Gilbert Stair Railing Contractor for Custom Cable, Metal & Stair Railings Built Locally

Gilbert Stair Railing Contractor Scottsdale Railing and Gate LLC is a Phoenix-based metal fabricator and installer that builds custom stair railings for homeowners throughout Gilbert. We serve folks who are done with flimsy builder-grade handrails and want something that looks good, holds strong, and actually fits their house. We design and install stair railings that are welded, measured, and finished in Phoenix. Locals hire us because we build it ourselves—no kits, no outsourcing, just real railings for real homes.

Local Railing Builder for Stair Railings in Phoenix

We installed a stair railing last year in a home near Gilbert Regional Park—two-story place with a big open entry and a switchback staircase. The client had just redone the floors and wanted the stair rail to match the new white oak and the clean lines of the house. We welded flat-bar steel posts, ran horizontal stainless cable between them, and topped it with a custom oak rail that followed every angle of the stairs and landings. All the posts were mounted into the stair stringer with hidden base plates and every cable fitting was tucked inside the steel. Looked sharp, stayed clean, and let the light flow through. We built it in our Phoenix shop and installed it in one long day. That’s the kind of stair railing we love building—something that belongs in the space and works as hard as it looks.

Popular Stair Railing Styles by Phoenix Contractors

Flat-Bar Steel with Cable Infill
Clean, modern, and sturdy. We build these a lot in newer Gilbert neighborhoods like Cooley Station and The Bridges. Steel posts and tensioned stainless cable, usually with a wood cap.

All-Wood Rail with Hidden Brackets
Warm, traditional, but still crisp. We use white oak or walnut for the top rail, mount it to the wall or stringer with concealed steel brackets. Seen this style in older homes near downtown Gilbert.

Powder-Coated Pickets with Modern Spacing
Not old-school scrollwork—just square pickets, clean spacing, and a cap rail. We build this style often for transitional homes in Agritopia.

Vertical Cable Inside Side-Mounted Posts
Cables drop straight down between rails. Harder to build, but it looks great and stands out. We installed one of these in a custom build off Higley Road.

Glass Panels with Metal Framing
We used this in a house in Val Vista Lakes—tempered glass panels between matte black aluminum posts. Sleek and upscale, fits perfectly with natural light and open stairs.

Radius Stair Rail with Rolled Steel
We’ve rolled curved handrails for custom homes near Seville. Every piece gets bent to match the stair shape exactly. Time-consuming, but flawless when done.

Minimalist Aluminum with Composite Cap
Lightweight, no maintenance, and subtle. We’ve installed this in townhomes and condos off Warner Road. Works well in tighter spaces.

Rust-Finish Steel with Cable Infill
We sealed naturally rusted steel posts and ran polished cable through for contrast. Feels raw and real—perfect for desert modern builds.

Steel Tube Rail with Open Treads
We built this in a Fulton Ranch custom—steel posts bolted to the stair stringer, cable between, oak top rail. Fit like a glove between floating treads.

Cable Railing Materials – What Phoenix Contractors Use

Aluminum

We use aluminum for stair railing posts when rust is a concern—like near windows, pools, or humid spots. It’s powder-coated, light, and clean-looking. Cables run through pre-drilled holes with tensioners we hide in the post. It’s not as strong as steel but works well for light-duty installs.

Wrought Iron

Old-school and heavy. We weld these in our Phoenix shop, grind them clean, and powder-coat them in black, bronze, or custom colors. Holds up strong, especially in homes that want some classic detail without the bulk.

Composite

Used mainly in exterior stair rails—composite posts and caps with a steel or aluminum core. We drill through them for cable or steel bar infill. No rot, no paint, no maintenance. Not flashy, but great when you don’t want to think about it again.

Stainless Steel

Top of the line. We use marine-grade stainless for posts, cable, and hardware. Won’t rust, won’t pit, just holds clean lines forever. Looks great in bright interiors, near water, or any place you want premium with zero fuss.

Galvanized Steel

More utilitarian, but solid. Galvanized stair railings get coated after for color or sealed to keep that raw industrial tone. We’ve used this in garages, back steps, and some minimal modern interiors that like that gritty edge.

Wood

Oak, walnut, redwood, or ipe—we cut and finish top rails in-house. Mounted to steel posts or sometimes wall-mounted with hidden brackets. Adds comfort, grip, and some softness to modern stairs.

Where You’ll See Stair Railings in Phoenix

Interior Staircases—We mount railings to treads, stringers, or walls depending on layout. Floating stairs? Open risers? Tight switchbacks? We’ve done them all. The trick is building to match the stairs, not forcing a system onto it.

Exterior Entry Steps—Homes with raised entries in Gilbert often need front-step railings. We use powder-coated aluminum or steel, bolt to concrete, and build clean curves or angles as needed.

Garage or Utility Steps—Not fancy, but they still need to be done right. We build simple, strong steel stair rails bolted into slab or wood frame—especially in side entries or split-level homes.

Pool Deck Steps—Code says you need them, but style says do it clean. We build cable or aluminum stair railings that meet safety rules and still keep sightlines to the pool or patio.

Lofts and Landings—Often stair rails tie into upper-floor guardrails. We match the post style and top rail for a continuous, clean finish that flows with the layout.

Phoenix Cable Railing Design Ideas for Custom Homes

Warm Wood Cap over Black Cable Rail

We installed this near Power and Germann. Stair treads were white oak, so we matched the top rail and built matte black steel posts with brushed cable. Balanced warmth and contrast.

All-Stainless Stair Rail in a Lofted Entry

This was for a builder in Lyons Gate. Everything was brushed stainless—posts, cable, hardware—mounted into concrete and stair stringers. The whole setup felt crisp and modern.

Cable + Curved Steel Rail in Seville

Client had a winding staircase with a custom chandelier in the middle. We rolled a continuous handrail from steel, mounted side-posts, and tensioned cable on every landing. It came together smooth.

High-End Cable Railing Builders in Phoenix – Art Meets Metal

We don’t just install stair railings—we build them. At Scottsdale Railing and Gate LLC, everything is fabricated in-house in Phoenix. We weld, grind, and finish it ourselves, then bring it to your home and install it like it was made for that staircase—because it was. Builders and homeowners in Gilbert call us when they’re done settling for kits and want something custom. We bring tape measures, not prefab posts. Our stair railings fit clean, hold strong, and show pride in every weld and cut.

Common Questions Locals Ask About Cable Railings

What are cable railings?
They’re railing systems that use tensioned stainless steel cable between posts instead of pickets or glass. They keep spaces open and clean while still being safe and to code.

What materials are they made from?
Cable railings are made with marine-grade stainless cable and hardware. The posts can be steel, aluminum, composite, or wood. Top rails vary—wood, powder-coated steel, stainless, or composite.

Where are they most commonly installed in Phoenix?
Staircases, decks, balconies, and pool areas. In Gilbert, we install them mostly in staircases for new builds and remodels where the design leans modern or transitional.

Phoenix Neighborhoods with Cable Railings

We’ve worked on stair railing jobs in nearly every corner of Phoenix. Roosevelt Row townhomes often get matte black steel with horizontal cable. North Central remodels lean more traditional with square pickets and wood caps. Arcadia homes mix oak with steel for a warm-modern vibe. Downtown lofts usually go all-in on raw metal and minimalist cable systems. South Mountain area homes favor clean powder-coated aluminum for outdoor stairs and patios.

In Gilbert, we’ve built stair railings in Agritopia, The Bridges, Val Vista Lakes, Seville, Power Ranch, Lyons Gate, and Chandler Heights. One home near Warner and Recker got a stainless cable setup that tied right into a second-floor loft. Another in Layton Lakes used brushed aluminum and a wood cap to flow with their kitchen and flooring. Gilbert homes are all over the map in style—but no matter the layout, we’ve built a stair rail that fit right in.

Scottsdale Railing and Gate LLC
Phone: 978-360-0060