Phoenix Railing Company – Custom Steel And Cable Projects Stair Builder

Phoenix Railing Company for Custom Cable, Metal & Stair Railings Built Locally

Phoenix Railing Company Scottsdale Railing and Gate LLC is your go-to railing contractor based in Phoenix, fabricating and installing custom cable, metal, and stair railings across the Valley. We serve homeowners, architects, and builders who want real craftsmanship—no prefab kits, no sloppy installs, no subcontractors. Just clean welds, tight cables, and custom work made for this hot, dusty, view-filled city. Folks hire us because we actually care how it all comes together.

Local Railing Builder for Cable Railings in Phoenix

I saw one of our cable railings last week while grabbing tacos near Melrose on 7th—second-floor balcony above a mid-mod duplex. Tight horizontal cables stretched between black steel posts, brushed stainless top rail. Looked sharp as ever, even after three years in the sun. We built that railing for a local developer who wanted to keep the downtown skyline in view without compromising safety. Posts were powder-coated at our Phoenix shop, and we installed them using wedge anchors straight into the concrete slab. Cable ends got hidden inside the posts—no bulky hardware. Stays cool even when the temp hits 110. That’s what you get when a Phoenix railing contractor builds it like it’s going to last forever.

Popular Cable Railing Styles by Phoenix Contractors

Black Steel with Horizontal Cable
Probably the most common style around Roosevelt Row. Clean lines, matte finish, horizontal stainless cable running tight. Built for rooftops and balconies.

Wood Top Rail with Metal Posts
This one’s big in Coronado Historic District. Warm oak top, powder-coated posts, stainless cable for contrast. Adds warmth to older homes.

Vertical Cable Stair Rails
We’ve done these in Garfield and Encanto—cables drop straight down instead of running side to side. Looks modern, requires dead-on tensioning.

Double Top Rail for Safety and Style
Usually in places like Biltmore, especially on balconies. Adds a second top rail as a handhold or lean spot. Sleek and strong.

Cable + Glass Panel Combo
Not common, but man is it pretty. Cable runs behind tempered glass—barely there but strong. We did one off 44th and Camelback and it turned out killer.

Rust Patina Steel with Cable Infill
We let the steel oxidize and then seal it. It gets that raw, reddish tone. Perfect for desert modern homes around South Mountain.

Aluminum Posts with Stainless Cable
Budget-friendly and great for poolside installs. Won’t rust, won’t fade. Usually seen in Laveen and new builds near Ahwatukee.

Interior Floating Stair Cable Railing
Cables stretch between floating treads with almost invisible posts. Clean and modern. We built one for a custom home near Central and Missouri.

Cable Infill Between Block Columns
We’ve seen this on patios in Sunnyslope—concrete or block columns with custom metal spans. Cable runs between spans to keep the space open.

Angled Deck Rails with Tight Cable Lines
Lots of hillside homes in Ahwatukee and near Piestewa Peak use this style. We custom cut the angle of each post and use internal cable guides.

Cable Railing Materials – What Phoenix Contractors Use

Aluminum

We use extruded aluminum for posts and rails where folks want lightweight and rustproof options. We get it from a local supplier out in Mesa. Cuts clean, powder coats beautifully, and we drill it in-shop to fit cable hardware. It finishes smooth with satin or gloss. Pros: never rusts, lighter than steel, great for pools. Cons: not as strong. We usually recommend this for second-story decks or perimeter pool railings.

Wrought Iron

Old-school and bombproof. Comes in raw from the mill—we cut, weld, and grind it in our shop. It’s heavy, strong, and takes powder coat well. Once installed, it’s not going anywhere. Cables are tensioned through pre-drilled holes. The look is solid, almost vintage-industrial. Great for downtown Phoenix and older homes.

Composite

Made from recycled plastic and resin. Usually used for posts when clients want zero maintenance. It’s tricky to drill for cable—needs special sleeves—but once it’s in, it lasts. Looks more modern farmhouse than industrial. Good for shaded patios or low-sun areas like backyards in Arcadia Lite.

Stainless Steel

This is what you want if looks and longevity matter. Marine-grade 316, polished or brushed. We use it for posts, fittings, and top rails. It’s pricey but never fails. Shines up like jewelry and keeps that finish for years, even in Phoenix’s brutal sun. Usually seen on custom homes near Camelback and in Paradise Valley.

Galvanized Steel

Hot-dipped in zinc to resist corrosion. We use this where folks want steel strength without the cost of stainless. It’s a little rougher in finish—gray and gritty—but tough as nails. Seen on utility staircases, back balconies, and side-yard entries.

Wood

We use wood for top rails more than posts, though sometimes we’ll mount cable between timber beams. Most common are ipe, redwood, and oak. Sanded smooth, finished with oil or sealant. Wood warms up a cable system and makes it feel more natural. Needs touch-ups every few years.

Where You’ll See Cable Railings in Phoenix

Staircases—Interior or exterior, floating or framed, cable railings keep things safe without closing up the space. We use base-mounted posts or side-mount brackets depending on the stair style.

Decks—Especially in homes near South Mountain or Ahwatukee Foothills where views are key. We space posts wide and run long stretches of uninterrupted cable for a clean look.

Balconies—Midtown apartments, custom homes near Biltmore, rooftop lounges downtown—cable railings are all over. They let light and airflow through while keeping things secure.

Loft Railings—In Central Phoenix and Garfield, open floorplans often mean mezzanines and lofts. Cable rail fits the industrial vibe while keeping everything open.

Pool Fences—Arizona code means fences are required, but cable gives you a better view than glass or pickets. We build them tight to code, low to the ground, and safe for kids and pets.

Phoenix Cable Railing Design Ideas for Custom Homes

Mid-Century Modern Cable Rail in Encanto

We matched the angles and lines of a mid-mod gem near 15th Ave and McDowell. Used brushed stainless cable and a flat oak top rail. Felt like it always belonged there. Clean, crisp, and cool in the shade.

Desert Patio with Rusted Steel + Cable

Built this out in the Desert Ridge area. Let the posts rust naturally over a few weeks, sealed them, then ran marine-grade stainless cable. Fits the dry earth tones and cactus-filled backyard perfectly.

White Interior Cable Rail for a Light, Airy Look

We did this in a loft off 7th Street—white powder-coated posts, white oak top rail, and stainless cable. Reflected the natural light pouring in from big windows. Modern without being cold.

High-End Cable Railing Builders in Phoenix – Art Meets Metal

Not every contractor’s cut out for cable railing work. There’s precision in every pull, every weld, every post. That’s where we come in. At Scottsdale Railing and Gate LLC, we don’t farm out the hard parts—we do it all right here in Phoenix. We take raw metal and shape it into something that looks effortless but took hours of layout, cuts, welds, and finish work. Locals trust us because they know we’re not slapping prefab kits on their house. We build everything with a fabricator’s eye and a local’s mindset. Art meets metal, and the results speak for themselves.

Common Questions Locals Ask About Cable Railings

What are cable railings?
Cable railings use tensioned steel cables instead of traditional spindles or glass panels. They’re popular for their clean look and see-through style.

What materials are they made from?
Usually stainless steel cables, with posts made from aluminum, steel, composite, or sometimes wood. Top rails vary depending on the look—wood, steel, or aluminum.

Where are they most commonly installed in Phoenix?
We install cable railings on staircases, balconies, decks, pool surrounds, and interior lofts all over Phoenix. They’re especially common in homes with views or open-concept layouts.

Phoenix Neighborhoods with Cable Railings

We’ve installed cable railings across nearly every neighborhood in Phoenix. In Arcadia and Paradise Valley, you’ll find our brushed stainless systems with wood top rails, perfect for upscale patios and poolsides. Over in Biltmore and North Central, we’ve done black steel with cable for mid-century and contemporary remodels. Camelback East sees a lot of mixed materials—cable with composite posts or glass hybrids.

In Garfield, Coronado, and Roosevelt Row, you’ll find our work inside lofts and on second-story balconies, keeping the lines clean and modern. We’ve even worked in newer developments in Laveen and Desert Ridge where views matter just as much as code compliance. If you see a sleek, cable-lined railing around Phoenix—chances are, we built it.

Scottsdale Railing and Gate LLC
Phone: 978-360-0060