Troon Gate Contractor – Driveway And Entry Gates

Troon Gate Company | Phoenix Railing Contractor for Custom Cable, Metal & Stair Railings Built Locally

Troon Gate Company Scottsdale Railing and Gate LLC is a Phoenix-based custom fabrication shop serving homeowners in Troon who need high-end gates that actually fit their homes — not just the opening. We build everything in-house, from laser-cut privacy gates to arched entry pieces with forged scrolls. Folks in Troon hire us when the home demands something clean, strong, and styled — because let’s be real, prefab won’t cut it on a hillside estate.

Local Railing Builder for Custom Gates in Phoenix

We recently wrapped up a job just off 114th Street near Troon Mountain. The client’s old gate had rusted out and wobbled every time the wind hit. We built a new gate from scratch — full steel frame, laser-cut desert silhouette up top, cedar slats below, and a side-hinged soft-close latch. The colors matched the iron lanterns flanking their entryway. We set new footers for better stability and welded all hardware on-site. Now, it swings like a dream and doesn’t look like it’s trying too hard. That’s how gates should be done in Troon — clean lines, quiet mechanics, and built to match the land.

Popular Custom Gate Styles by Phoenix Contractors

Laser-Cut Pattern Gates
Cut right through steel panels — saguaro, address numbers, or even abstract motifs. We powder coat these in black, bronze, or tan. They look sharp and cast cool shadows in Troon’s morning sun.

Scroll Iron Arched Gates
Classic curved-top gates with scroll details, finials, and hammered bar stock. We forge these by hand, and they go perfectly with Mediterranean-style builds on the hill.

Wood + Steel Hybrid Gates
Framed in powder-coated steel with cedar or ipe slats inside. Modern but warm — we’ve done these for homes in Desert Summit and Troon Village.

Horizontal Bar Gates
Minimal and clean — all steel, spaced evenly, welded tight. Matte black or dark bronze finish. They fit in with stucco and stone homes that don’t want too much detail.

Double Swing Entry Gates
Big, bold, and symmetrical. These meet in the middle with hardware that locks solid. We anchor them deep to handle slope or heavy use.

Solid Privacy Panel Gates
Full steel sheets framed in square tube. Keeps views out and sound in. These are popular for trash enclosures, side gates, and utility access near garages.

Mesh Screen Gates
Perforated steel lets air move but cuts visibility. Works well in tight spaces or pool zones where you want privacy but still want the breeze.

Monogram Gates
Initials or address digits cut into the top or side of the panel. Subtle, but adds identity. Clean lines, no fuss.

Walkway and Garden Gates
Smaller footprint but still custom built. Arched, flat, or square — whatever lines up with the home’s style. Great for pathways and courtyards.

RV and Side Yard Gates
Built wider, taller, and stronger. These have to survive wind, daily use, and often back up to desert wash or utility areas.

Cable Railing Materials – What Phoenix Contractors Use

Aluminum

Lightweight and rust-resistant. We use it for lighter gates that mount on block walls or where slope needs careful engineering. Clean look, holds powder coat well.

Wrought Iron

Heavy, old-school, and made to be bent by hand. Ideal for classic gates with scrolls or radius tops. Still one of our go-to materials for long-term durability.

Composite

No fade, no crack. We use it as infill in custom frames when clients don’t want to deal with wood. Matches well with modern finishes and holds up in the sun.

Stainless Steel

More for hardware and accents, but we’ve used it for entire gate panels in ultra-modern projects. Doesn’t rust, shines clean, and holds tension like a champ.

Galvanized Steel

Every frame we build starts with this. Hot-dip treated, then primed and powder coated. It’s the backbone — heavy enough to last, light enough to work with.

Where You’ll See Custom Gates in Phoenix

Side Yards
We install them tight to block or stone walls, weld our own brackets, and make sure they don’t sag with time. These gates get daily use and take the heat — we build them like it.

Front Entry Courtyards
Usually framed by stone or stucco walls. We design to fit the slope, finish to match your fixtures, and make sure it swings shut with a whisper.

Driveways + Vehicle Gates
Manual or motorized. We pour our posts deep and weld the gates to spec, whether you’re flat lot or sloped hillside. Includes latching and sensor hardware when needed.

Trash Enclosures + Utility Access
Small spaces but high-use. These are often overlooked, but ours are square, quiet, and tight — and they don’t clang in the wind.

Garden and Pool Walkways
Decorative and durable. Smaller gates with clean welds, self-closing hinges, and finishes to match the home. Safe for kids, good for airflow.

Phoenix Cable Railing Design Ideas for Custom Homes

Courtyard Gate with Saguaro Cutout

We did one near Troon North where the homeowner wanted something modern but not cold. We laser-cut a saguaro scene into the top third, filled the rest with cedar, and matched it to their desert landscaping. Total one-off.

Modern Slat Gate with Privacy Infill

A home near Pinnacle Peak had a long side wall with a worn wood gate. We rebuilt it with steel frame, composite slats, and matte black finish. Looks modern, doesn’t warp, and locks tight.

Forged Scroll Gate with Bronze Finish

Client wanted a dramatic entrance. We hand-bent all the scrollwork, gave it a dark bronze patina, and set it between stone columns at their front path. Classy without being flashy.

High-End Cable Railing Builders in Phoenix – Art Meets Metal

At Scottsdale Railing and Gate LLC, we’re not selling prefab panels. We’re building architectural elements. We treat every gate like it belongs on a blueprint, not a shelf. That means clean welds, hardware that works year-round, and powder coat finishes that don’t fade out by August. In Troon, people expect the work to look like it belongs in the build — and that’s exactly what we do. Every hinge, every corner, every bolt is set with intent. That’s metalwork, not just installation.

Common Questions Locals Ask About Cable Railings

Cable railings are tensioned steel lines — usually horizontal — that act as a clean safety barrier without blocking the view. In Phoenix homes, they’re used around patios, balconies, interior staircases, and pool decks. The cables are marine-grade stainless, anchored to posts we build from steel or aluminum. When done right, they disappear into the view and hold strong for decades with minimal upkeep.

Phoenix Neighborhoods with Cable Railings

We’ve built cable railings across Desert Mountain, Arcadia, and the Biltmore area. In those homes, it’s usually second-story balconies, wraparound decks, or floating staircases. They want clean, minimal lines that don’t steal from the view.

Up in Troon, we’ve installed cable rail on hillside patios overlooking the McDowells, and staircases that lead up to rooftop terraces. It’s a natural fit for the terrain — solid, subtle, and built for wide-open views. When the design leans modern, cable just works.

Scottsdale Railing and Gate LLC
Phone: 978-360-0060