Paradise Valley Gate Contractor – Driveway And Entry Gates

Paradise Valley Gate Company | Phoenix Railing Contractor for Custom Cable, Metal & Stair Railings Built Locally

Paradise Valley Gate Company Scottsdale Railing and Gate LLC is a Phoenix-based custom metal shop serving Paradise Valley with high-end gates for estates, hillside homes, and luxury remodels. We’re the team homeowners call when a prefab gate won’t cut it — because everything we build is welded, finished, and installed in-house. From hand-forged courtyard entries to sleek motorized driveway gates, our work fits the home, the grade, and the Arizona weather.

Local Railing Builder for Custom Gates in Phoenix

Not long ago, we were working on a home tucked into Mummy Mountain. The client had just redone their hardscape — pavers, lighting, fresh landscaping — but still had this old chain-link utility gate around the side. Not exactly luxury. We replaced it with a steel frame gate, laser-cut pattern in the top panel, and cedar inlay below. Color-matched to their bronze fixtures, installed between two custom stone columns we drilled into ourselves. When it was done, the gate looked like it was always supposed to be there. That’s the level Paradise Valley expects, and that’s what we deliver.

Popular Custom Gate Styles by Phoenix Contractors

Laser-Cut Decorative Panel Gates
Detailed cutouts with monograms, botanical patterns, or geometric designs. Used often in PV estates with custom lighting and minimalistic design.

Hand-Forged Scroll Iron Gates
Classic arch-top with hand-bent scrolls, finials, and forged details. These are still king in Spanish-style homes and Tuscan villas on the east side.

Wood Slat + Steel Frame Gates
Steel perimeter frames with ipe or cedar inlay. Clean and organic. Perfect for homes that balance desert modern with warmth.

Minimalist Flat Bar Gates
Horizontal or vertical bars, thin profile, matte finish — clean and strong. Used in modern hillside builds near Tatum Boulevard.

Solid Panel Privacy Gates
Sheet steel framed tight, no visibility. These go around garages, alleys, and utility zones. We build them tall and quiet.

Double Swing Entry Gates
Symmetrical and smooth-swinging. Sometimes manual, often automated. We install motors and safety sensors when needed.

Mesh or Perforated Steel Gates
Let air and light through, but still control access. Used near pool zones or utility areas that need security without closing off the view.

Driveway Gates (Motorized or Manual)
Wide gates on slopes or level pads. We pour our own posts, fabricate the gate from scratch, and align everything with the drive.

Garden and Walkway Gates
Smaller gates, often decorative, but still custom-built. Arched or flat-top, scroll or slat — whatever fits the home’s story.

Custom Address or Logo Cut-In Gates
For homeowners who want their address or initials worked right into the gate face. Adds class without being loud.

Cable Railing Materials – What Phoenix Contractors Use

Aluminum

Light, rust-proof, and clean. We use it for gates that mount to lighter structures — especially when HOA or custom paint matching is involved.

Wrought Iron

The workhorse of classic Arizona gates. Heavy, moldable, and built to age with grace. Still the choice for courtyards and high-end entry gates in PV.

Composite

Wood look, no maintenance. Often installed in gated communities that require a certain fence or infill style. Also nice when you want less upkeep.

Stainless Steel

Mostly used for accents, hinges, and cable work. But we’ll occasionally fabricate full stainless sections if the design demands a full modern, mirror-clean look.

Galvanized Steel

Our core framing material. Welded, ground, and coated before install. It’s the backbone of every gate we build that’s meant to last more than just a few summers.

Where You’ll See Custom Gates in Phoenix

Front Courtyards
We build these to complement stone or stucco — matched arches, custom hinges, and welded tabs set in solid masonry.

Side Yards
Usually tighter access, but still deserves a clean gate. We fabricate these to fit the slope, seal them against sun and water, and build them for heavy daily use.

Driveway and Vehicle Access
Motorized or manual swing gates with underground motors, safety stops, and tight alignment. Built strong and subtle to blend with the home.

Utility and Equipment Zones
Back of property or side yard? We’ve done welded privacy panels that hide pool equipment, trash cans, or propane tanks without standing out.

Gardens and Inner Walkways
Decorative but practical. Often part of a larger courtyard layout or entry experience. Sometimes hand-forged, sometimes clean and modern.

Phoenix Cable Railing Design Ideas for Custom Homes

Laser-Cut Privacy Gate with Address Panel

A home off Desert Fairways Drive had us cut their address right into the gate face — bold serif font, centered in steel. Matte black powder coat, mounted between stacked stone columns. It became the focal point of the driveway.

Cedar + Steel Slat Gate in a Walkway

In a home near Lincoln Drive, the side gate led into a shaded walkway lined with succulents. We matched the cedar inlay to their planter boxes and kept the frame narrow and squared off. Quiet, understated, beautiful.

Scroll Iron with Glass Inset

Client wanted something unique for their garden entry. We inlaid frosted tempered glass between the scrollwork — just enough opacity to make the light glow through. Soft, elegant, and completely one-of-a-kind.

High-End Cable Railing Builders in Phoenix – Art Meets Metal

At Scottsdale Railing and Gate LLC, we don’t just weld gates — we build pieces that look like they were designed with the house from day one. We measure slope, adjust hardware for temperature changes, weld on-site if needed, and install with no shortcuts. Paradise Valley expects craftsmanship that doesn’t just work — it blends, it holds up, and it feels intentional. That’s what we bring, every project.

Common Questions Locals Ask About Cable Railings

Cable railings are tensioned stainless wires stretched between posts — usually horizontal, sometimes vertical. They’re used for decks, balconies, and staircases where the view is the priority. We use marine-grade cables and steel or aluminum posts. In Phoenix’s heat, you want something that holds shape and doesn’t sag — and cable’s perfect for that. It’s minimal, strong, and custom-built to fit the space without getting in the way.

Phoenix Neighborhoods with Cable Railings

You’ll see cable railings all through Arcadia, Camelback East, and newer parts of Desert Ridge. In Paradise Valley, they show up on second-story balconies, rooftop lounges, and open staircases — especially where glass and steel define the architecture. They fit homes with clean geometry and sweeping views.

Some of our recent installs were near 40th Street and Stanford Drive, where the client wanted cable on a cantilevered patio with views of Camelback. Another was up north, off Quartz Mountain — floating stairs inside with steel and cable. Sleek, modern, and exactly what the home needed.

Scottsdale Railing and Gate LLC
Phone: 978-360-0060