Glendale Gate Contractor – Driveway And Entry Gates

Glendale Gate Company | Phoenix Railing Contractor for Custom Cable, Metal & Stair Railings Built Locally

Glendale Gate Company Scottsdale Railing and Gate LLC is a Phoenix-based shop building custom steel and iron gates for Glendale homeowners who want something solid, clean, and built to fit. We serve folks redoing their homes, replacing worn-out wood, or just tired of gates that sag, drag, or barely latch. From modern laser-cut styles to classic scroll iron entries, we fabricate and install every project ourselves — no kits, no middlemen.

Local Railing Builder for Custom Gates in Phoenix

We did a project over near 59th Avenue and Thunderbird — single-story stucco home with a curved block courtyard wall. Their old wood gate had rotted at the bottom and wouldn’t shut in summer. We built a new arched iron gate with horizontal steel bars, finished it in matte black, and mounted it on custom-welded tabs drilled straight into the block. It closed smooth, latched clean, and looked like it was part of the original build. The homeowners were just glad it worked without slamming — but also said it made the whole entry look brand-new.

Popular Custom Gate Styles by Phoenix Contractors

Laser-Cut Steel Entry Gates
Modern gates with cactus patterns, street numbers, or abstract cutouts — powder-coated any color. These show up a lot in custom homes around Arrowhead and Thunderbird Ranch.

Scroll Iron Courtyard Gates
Traditional iron with arch tops and scrollwork. We still get requests for this look in older neighborhoods like Marshall Ranch and north of Peoria Avenue.

Horizontal Bar Gates
Steel framed with flat horizontal pickets or wood slats. Simple, modern, and solid. Great for remodels in neighborhoods like Sierra Verde or Provence.

Wood + Metal Hybrid Gates
Welded steel frame with cedar, ipe, or composite inlays. These bring warmth and contrast — especially when tied into landscaping or wood accents nearby.

Side Yard Utility Gates
Built to fit tight spaces between block walls. We install these level, with zero sag and solid locks — often mesh or solid panel to match privacy needs.

RV + Driveway Gates
Oversized swing gates with deep-set posts and heavy-duty latches. Welded to stand up to wind and use. Seen in larger lots near 83rd Avenue and Bell.

Privacy Panel Gates
Flat steel sheet inside a frame — blocks all views, sealed and powder-coated. Used for utility access, trash enclosures, or to just keep neighbors from peeking in.

Mesh Dog-Proof Gates
Framed gates with steel mesh welded in — airflow with visibility but safe for pets. These are common in backyards and poolside areas.

Double Swing Entry Gates
Matched panels meeting centerline. Often seen in courtyards and wider walkways. Great for symmetry and higher-end homes.

Monogram Gates
Address numbers or initials cut right into the panel. Adds identity and polish without trying too hard.

Cable Railing Materials – What Phoenix Contractors Use

Aluminum

We use this for light-duty gates where weight or rust is a concern — mostly in modern or stucco-heavy homes. Powder-coated and corrosion-proof.

Wrought Iron

Classic for scrolls and arches. Heavy, tough, and still one of the most popular options for traditional gates in Glendale. We powder coat it so it survives the heat and rain.

Composite

Trex or similar boards in steel frames. Won’t fade or crack in sun. Great for side yards or HOA-regulated homes where wood’s not allowed.

Stainless Steel

Not for full gates usually, but used for hardware, handles, and accents. Clean and rust-resistant — great on modern builds that need that high-end feel.

Galvanized Steel

Our structural base material. Welded, coated, and built to take a hit. This is what keeps gates from warping or sagging after two summers.

Where You’ll See Custom Gates in Phoenix

Side Yards
Usually between block walls. We weld custom brackets, build frames to fit exact dimensions, and install clean hardware that lasts. These get used daily — they need to swing smooth and shut tight.

Front Courtyard Entries
Anchored into masonry, framed to match arches or trim. Whether it’s scroll iron or modern steel, it’s the first impression and we build it to last.

Driveway and RV Access Points
Tall, wide, and welded strong. We pour footers for post support and align the swing to avoid dragging or sagging — especially on sloped drives.

Pool Zones
Self-closing hinges, code-compliant latches, and tight spacing. Used for safety, but we still build them to match the home’s style.

Backyard Trash or Equipment Areas
Behind sheds, beside garages, or next to pool pumps — these are privacy-first gates that get beat up. We build them stout, quiet, and low-profile.

Phoenix Cable Railing Design Ideas for Custom Homes

Desert-Cut Steel Gate with Ocotillo Motif

We installed this for a home near 67th Ave and Greenway. The gate had a laser-cut panel with native desert patterns, finished in deep brown. It blended perfectly into their cactus garden and rocked the sunset backlight.

Side Gate with Composite Planks

A homeowner near Glendale Community College asked for low-maintenance. We used dark composite boards in a steel frame, powder-coated the frame to match the trim, and sealed it all with stainless hardware.

Arched Scroll Gate with Address Cut-In

Near Historic Catlin Court, we built a scroll iron gate with a soft arch, wide scroll band, and house numbers cut into the lower panel. It looked classic but unique — right in line with the historic home.

High-End Cable Railing Builders in Phoenix – Art Meets Metal

At Scottsdale Railing and Gate LLC, we weld every gate ourselves — no pre-fab panels, no shortcuts. That means tight corners, clean welds, and hardware that works after five years, not five months. We shape every design around the site — whether it’s stucco, block, or stone. Our team builds gates that feel like they were always part of the house. In Glendale, folks hire us when they want something built right the first time — no sag, no guesswork, no wobble.

Common Questions Locals Ask About Cable Railings

Cable railings are modern safety barriers that use horizontal stainless steel wires between posts. They’re most often used on decks, balconies, stairs, and rooftops where people want safety without losing the view. In Phoenix, they’re installed indoors and out — often in steel or aluminum frames. They don’t block light, they stay tight with proper tensioning, and they stand up to Arizona weather like champs.

Phoenix Neighborhoods with Cable Railings

From Moon Valley to Midtown, you’ll see cable railings showing up in modern homes and remodels. Roosevelt Row and Garfield District use them indoors on second floors and mezzanines. New builds in Desert Ridge and East Phoenix are using cable for outdoor balconies and patios.

Out west in Glendale, neighborhoods like Arrowhead Ranch, Rovey Farm Estates, and Orangewood are where we’ve built custom railings and gates. Cable rail shows up on second-floor balconies, modern interior stairs, and even around pool decks where families want clean views. The material’s tough, subtle, and fits almost any design — that’s why it’s popping up everywhere.

Scottsdale Railing and Gate LLC
Phone: 978-360-0060