Chandler Cable Railing Contractor – Sleek Railing Installations Stair Builder

Chandler Cable Railing Company | Phoenix Railing Contractor for Custom Cable, Metal & Stair Railings Built Locally

Chandler Cable Railing Company Scottsdale Railing and Gate LLC is a Phoenix-based railing contractor that builds custom cable railings, metal railings, and stair systems for homeowners and builders across Chandler and the East Valley. We handle the whole process in-house — from fabrication to installation — so nothing gets lost in translation. Locals call us when they want railing that lasts, doesn’t block the view, and actually looks like it belongs on a high-end home. We work with developers, remodelers, and everyday homeowners who just want the job done clean and solid.

Local Railing Builder for Cable Railings in Phoenix

We installed a cable railing system for a client in Ocotillo with a second-story deck overlooking the water. Their old railing was wood, warped, and bulky — didn’t match the modern remodel they just finished. We swapped it out with matte black aluminum posts, tensioned stainless cable, and a clean cedar cap that softened the look. We mounted the posts directly into the concrete slab and used low-profile hardware to keep things sleek. When we were done, they had a clear line of sight across the whole lake. Not just safer — way better looking.

Popular Cable Railing Styles by Phoenix Contractors

Black Aluminum Cable Rail
Our most requested setup in Chandler — aluminum posts powder-coated black with brushed stainless cable. Lightweight, strong, and HOA-friendly. Shows up everywhere from Layton Lakes to Fulton Ranch.

Steel Frame + Cable Infill
Heavier and bolder than aluminum. We weld these in-house, powder-coat them, and tension the cable ourselves. Great for second-story patios or staircases where weight helps with strength and style.

Wood Cap on Metal Frame
A warm top rail — usually ipe or cedar — added to a metal frame. Works great in transitional-style homes where you want a little natural texture in the mix. We’ve done this look near Chandler Heights.

All-Stainless Cable System
Polished from top to bottom. Posts, rails, and cables in brushed stainless. Usually goes inside, but we’ve installed it outdoors too where ultra-modern architecture calls for it.

Floating Stair Cable Rail
Side-mounted posts follow the stair line and carry tight cable tension from tread to tread. A favorite for open-concept remodels around Downtown Chandler.

Cable with Glass Corners
Glass at the corners for wind protection, cable for the straight runs. Keeps the backyard open and usable even when the monsoon breeze kicks in.

Curved Cable Rail
Yes, we bend posts. Radius decks, spiral stairs, and rounded patios all get custom-drilled posts and angled cable holes. We installed one like this near Circle G and it turned out perfect.

Raw Steel and Cable
For homes with concrete, block, or steel details — we keep the steel raw, seal it, and run stainless cable for a clean but gritty feel.

Cable + Mesh Combo
Steel mesh on the bottom to block pets or kids, cable up top to keep the view. One of our go-to designs for young families in Cooper Commons.

LED Cable Top Rail
Top rail wired for low-voltage lighting. Glows just enough to see the railing line at night without lighting up the whole yard. Great for decks near Chandler Fashion Center.

Cable Railing Materials – What Phoenix Contractors Use

Aluminum

We use powder-coated aluminum for lightweight, rust-free installs. Posts are surface or fascia-mounted, cable runs clean. Most popular in Chandler for decks, balconies, and pool areas.

Wrought Iron

Not common for cable, but we use it for hybrid systems or when clients want something traditional with a twist. Welded in-house, powder-coated to resist rust, and fits older-style homes near San Marcos.

Composite

Used mostly as post sleeves or top caps to match trim or HOA specs. Won’t rot, but isn’t structural. Useful in newer neighborhoods with strict design standards.

Stainless Steel

Our cable of choice is 316-grade stainless — marine quality. Doesn’t sag, doesn’t rust, and tension holds tight. Used inside and out, from pool decks to staircases.

Galvanized Steel

Zinc-coated for durability. Painted or powder-coated after install. We use this where strength matters and the finish isn’t front and center — like utility stairs or side yard access rails.

Where You’ll See Cable Railings in Phoenix

Decks
Surface- or fascia-mounted to concrete or wood. We tension cable across custom post spacing for clean lines and safe drops. Used on view decks and patios across Chandler.

Stairs
Interior and exterior stairs get fitted cable posts that follow the rise. Every post drilled at the correct angle. Tight cables, no rattle, code-ready every time.

Balconies
Upstairs walkouts get framed in aluminum or steel with cable that opens the space while keeping it safe. Keeps the backyard and sky in full view.

Pools
We build to pool code with proper height, spacing, and gate latching. No pickets, no fence panels — just cable that holds the line and doesn’t block the breeze.

Interior Lofts
We side-mount posts to landings or upper floors and tension cable inside. Paired with wood or metal cap rails depending on the home’s design.

Phoenix Cable Railing Design Ideas for Custom Homes

Patio Overlook in Fulton Ranch

Used black powder-coated aluminum posts, stainless cable, and no top rail for a clean line of sight over the lake. Posts were fascia-mounted to keep the deck surface clear.

Interior Stair + Oak Cap Combo

Installed inside a two-story home with an open staircase. Black steel posts, brushed cable, and a thick oak cap. Tied the look into the hardwood floors beautifully.

Wind-Friendly Pool Rail

Off Arizona Ave, we installed a combo glass + cable railing that wrapped the pool. Glass at the ends to stop the gusts, cable down the long sides for airflow and view.

High-End Cable Railing Builders in Phoenix – Art Meets Metal

At Scottsdale Railing and Gate LLC, we treat railing like sculpture. Every post is cut, drilled, and welded in our own shop. Every fitting is measured in the field. Every cable is tensioned by hand — no shortcuts, no shaky hardware. We’re the crew people call when they want something built right the first time. Chandler homes aren’t cookie-cutter anymore. From the custom decks in Ocotillo to the staircase remodels in South Chandler, we build railing that matches the house — not the hardware store.

Common Questions Locals Ask About Cable Railings

Cable railings use tensioned stainless wire instead of wood pickets or metal panels. They’re framed in aluminum, steel, or composite and designed to keep spaces open while staying safe. Most use 316-grade marine cable and tight hardware to hold the line without flex. Around Phoenix and Chandler, you’ll see these on raised patios, second-story balconies, pool decks, and modern interior staircases. They’re popular because they don’t distract from the space — they frame it.

Phoenix Neighborhoods with Cable Railings

Cable railings are going in all over Phoenix. We’ve installed them in Arcadia with steel posts and no top rails for clear views of Camelback, and in Roosevelt Row lofts with exposed raw steel and industrial cable. In Biltmore, homes get stainless cable inside floating staircases, and out in Ahwatukee, we’ve built deck railings that keep mountain views wide open without blocking sightlines from the kitchen.

In Chandler, cable railing is quickly becoming a go-to. In Ocotillo, they’re on second-story patios with golf course views. In Cooper Commons, we’ve added cable to pool fencing and interior stair remodels. In Layton Lakes and Fulton Ranch, we’ve done full-deck replacements with fascia-mounted cable systems that open the yard up and hold tight through monsoon season. It’s one of those features that disappears when it should — and that’s the point.

Scottsdale Railing and Gate LLC
Phone: 978-360-0060