Glendale Metal Stair Railing Contractor – Custom Indoor And Outdoor Railings Stair Builder

Glendale Stair Railing Contractor for Custom Cable, Metal & Stair Railings Built Locally

Glendale Stair Railing Contractor Scottsdale Railing and Gate LLC is a Phoenix-based railing company building custom stair railings for homes throughout Glendale. We fabricate metal, cable, and wood-accented stair railings from scratch—no kits, no prefab. Locals call us when they want real craftsmanship, something that fits the house and holds up in the Arizona sun. Everything’s cut, welded, and installed by hand, right here in Phoenix.

Local Railing Builder for Stair Railings in Phoenix

We built a stair railing a few months back for a two-story home near Arrowhead Towne Center. The homeowner had redone their floors and wanted a modern railing that matched the new tile and wood accents. We fabricated matte black steel posts with horizontal stainless cable infill and added a walnut top rail to tie it all together. The house had high ceilings and lots of natural light, and the cable rail let that light flow. We mounted each post into the stair stringer using hidden base plates, tightened the cables to spec, and left with a clean, solid install that looked like it was part of the original architecture. That’s how we do stair railings in Glendale—measured, welded, and installed to fit right.

Popular Stair Railing Styles by Phoenix Contractors

Steel Posts with Cable Infill
This is a top pick for modern homes. Square steel posts, brushed stainless cable, and a clean wood cap. We’ve installed this style all over neighborhoods like Arrowhead Ranch and Sierra Verde.

Black Powder-Coated Pickets with Wood Top Rail
Think square bar pickets, tight spacing, and a stained cap that softens the look. A great fit for traditional homes near Westgate or Marshall Ranch.

All-Wood Rails with Steel Brackets
We’ve done this one in custom homes around Glendale Heroes Park—white oak rail, hidden hardware, mounted into drywall or wood stringers for a natural finish.

Glass Panels Between Matte Black Frames
We installed this in a townhome off 59th and Olive. Clear tempered glass lets light through the stairwell, framed in thin, powder-coated aluminum for safety without bulk.

Vertical Cable Rail
This one’s a standout—cables run top to bottom instead of side to side. We used it in a remodel in Glendale’s Provence neighborhood. Sleek and different.

Curved Steel Rail with Horizontal Cable
We rolled a steel rail for a winding staircase off 67th and Union Hills. Every cable cut to fit the curve. It was a beast to build—but worth every hour.

Aluminum Post with Composite Cap
We’ve done these in condo stairwells or tight hallways near Northern Ave. Lightweight and clean, with a wood-look cap that never needs refinishing.

Cable in Timber Columns
Thick fir or cedar posts with polished cable running clean through. This works well in desert-modern homes near Saddleback Meadows.

Exposed Welds and Raw Steel
Industrial and honest. We installed one of these in a home near Glendale Community College—sealed raw steel with square tube posts and no cap rail at all.

Cable Railing Materials – What Phoenix Contractors Use

Aluminum

Lightweight and rust-resistant. Aluminum gets powder-coated in black, white, or bronze and drilled for cable hardware. It’s great for interiors near windows or outdoor steps. Looks sharp and doesn’t need much maintenance, but it’s not as rigid as steel.

Wrought Iron

We shape and weld this old-school material in our Phoenix shop. It’s powder-coated to stay clean in the heat and dust. Works well when the house leans more traditional or needs something strong and solid.

Composite

Low-maintenance, fade-resistant, and useful when you don’t want to mess with sanding or sealing. Composite posts get reinforced and drilled for cable. We’ve used these in exterior staircases and sun-exposed lofts.

Stainless Steel

The premium option. We use marine-grade stainless for everything from posts to cable to fittings. Polished or brushed, it doesn’t flinch in the heat or near water. Perfect for open stairwells, high-end interiors, or anything where longevity matters.

Galvanized Steel

Tough and affordable. It’s dipped for rust resistance and gets painted or sealed depending on the look. We use this in garages, utility stairs, and homes that want strength with a bit of grit.

Wood

Mostly for top rails—white oak, walnut, or redwood. Adds warmth and grip. We finish it ourselves in the shop and bolt it straight to metal posts or wall mounts. Looks great on cable systems that need a little balance.

Where You’ll See Stair Railings in Phoenix

Interior Stairs—We mount into floor beams, tread plates, or side stringers. Cable rails, pickets, and glass panels all get custom-fitted to match your stair layout—whether it’s straight, L-shaped, or floating.

Exterior Entry Steps—We build steel and aluminum stair rails that hold up to monsoons and full sun. Powder coat protects the finish, and every post is anchored into slab or masonry.

Loft Railings—We match stair railings to loft edge guardrails for a continuous, clean finish. Seen this style in custom homes near downtown Phoenix and Sunnyslope.

Garage or Side Steps—Even simple stairs need clean, safe railings. We install galvanized or black powder-coated rails on concrete or block, often in side yard or back entry setups.

Pool Area Steps—Cable rail makes for a slick pool-safe stair rail that meets code but doesn’t block your view. We anchor the posts deep and tension the cable tight.

Phoenix Cable Railing Design Ideas for Custom Homes

Brushed Cable + Dark Wood Top Rail

We installed this near Arrowhead Lakes—brushed stainless cable, matte black posts, and a dark walnut cap that matched the new stair treads. Clean and classic.

Radius Rail with Side-Mount Posts

This one wrapped a curved staircase near Bell and 75th Ave. Rolled steel rail, cable infill, side-mounted posts on a concrete tread. Tight fit, smooth look.

Glass and Cable Combo Over a Split-Level

In a home near Desert Valley High, we used glass panels below and cable above to split the space cleanly. Slim profile, bright result, and fit the open-plan layout.

High-End Cable Railing Builders in Phoenix – Art Meets Metal

At Scottsdale Railing and Gate LLC, we don’t just install railings—we build them. Every stair rail we make starts in our Phoenix shop. We cut, weld, grind, and drill it to fit your stairs exactly. No kits, no sloppy hardware. Just clean lines, solid materials, and craftsmanship you can feel when you grab the rail. Glendale homeowners trust us because we treat railing like metalwork, not just code compliance. Whether it’s a modern loft or a desert estate, we build stair railings that belong.

Common Questions Locals Ask About Cable Railings

What are cable railings?
Cable railings are safety rail systems that use stainless steel cables instead of spindles or glass panels. They’re strong, subtle, and perfect when you want an open, modern look.

What materials are they made from?
The cable is always stainless steel. The posts can be steel, aluminum, wood, or composite. Top rails vary—metal, wood, or even composite if you’re going low-maintenance.

Where are they most commonly installed in Phoenix?
Staircases, balconies, decks, and pool steps. In Glendale, we do a lot of cable railings on second-story stairs, entry staircases, and modernized interiors.

Phoenix Neighborhoods with Cable Railings

We’ve installed stair and cable railing systems in every part of Phoenix—from modern lofts downtown to hillside homes in Ahwatukee. North Central remodels lean toward matte black picket railings with warm wood caps. Arcadia goes with brushed cable and white oak. South Mountain and Laveen clients often want something more industrial—galvanized or sealed raw steel, especially for outdoor steps.

In Glendale, we’ve worked in Arrowhead Ranch, Saddleback Meadows, Rovey Farm Estates, Provence, Marshall Ranch, Sierra Verde, and Glendale West. Homes near Arrowhead Lakes get clean cable systems that frame out their views. New builds in the northern neighborhoods often go full modern with cable, glass, or side-mount steel. Whether we’re anchoring into concrete or matching old stairs with new rail, we build everything to fit right—and last.

Scottsdale Railing and Gate LLC
Phone: 978-360-0060