Chandler Metal Stair Railing Contractor – Custom Indoor And Outdoor Railings Stair Builder

Chandler Stair Railing Contractor for Custom Cable, Metal & Stair Railings Built Locally

Chandler Stair Railing Contractor Scottsdale Railing and Gate LLC is a Phoenix-based railing fabricator installing custom stair railings in Chandler and across the Valley. We design and build welded metal, cable, and wood-accented stair railings for homeowners who want something that actually fits their home—and doesn’t feel like a cheap kit from the hardware store. Locals hire us because we fabricate everything ourselves and install it like it matters. Straight, strong, clean lines—no rattles, no shortcuts.

Local Railing Builder for Stair Railings in Phoenix

We built a stair railing last spring in Chandler Heights—two-story home with a modern staircase right off the main entry. The homeowner wanted something more open than the builder-grade pickets they started with. We cut and installed square steel posts with stainless cable running clean and horizontal, topped with a stained red oak rail to match the floors. That house had tons of natural light, and the railing made it feel even bigger. We bolted the posts into the side of the stair stringer, used recessed fittings to keep the cable ends hidden, and custom cut every rail segment to match the angles. The result? Safe, clean, modern—and built right here in Phoenix by folks who know what 115 degrees does to steel.

Popular Stair Railing Styles by Phoenix Contractors

Steel Frame with Cable Infill
Clean and modern, with tight cable spacing and low-profile steel posts. We’ve done this in downtown Chandler homes and newer builds in Ocotillo.

Black Powder-Coated Pickets with Wood Cap
Squared pickets, tight spacing, powder-coated black. Cap it with a warm wood top rail for balance. We built this for a client off Cooper and Chandler Blvd.

All-Wood Rail with Steel Mounts
Floating wood staircases with wood rail and hidden steel brackets. Perfect for softening up a modern interior without losing strength.

Vertical Cable Systems
More unique—cables run top to bottom instead of side to side. You’ll see these inside modern staircases where the client wants something a little different.

Glass Panel Between Metal Posts
We installed this in a home near Fulton Ranch. Clear tempered glass, black aluminum posts, low visual impact but high-end feel.

Radius Rail for Curved Staircases
Not easy, but we roll steel to fit those curves. We installed one like this in a custom home near The Islands—flawless bends, no gaps.

Aluminum Posts with Cable or Steel Bar Infill
Lightweight, rust-free, and slick. Used around loft stairs and pool entries in newer subdivisions.

Cable + Timber Combo
Stainless cable inside big cedar or fir posts. We’ve used this in rustic-modern homes off Chandler Heights and Lindsay. Feels grounded and clean.

Minimalist Steel with No Top Rail
For the ultra-modern crowd. We did this in a new build near Price Road—just tensioned cable and thin steel posts. Looks invisible, but it’s solid.

Cable Railing Materials – What Phoenix Contractors Use

Aluminum

Aluminum’s the go-to for stair railings near water or sun-heavy spaces. We get it powder-coated in black, white, or bronze and fit it with cable or steel infill. Lightweight, rustproof, and clean-looking, but not as rigid as steel.

Wrought Iron

Heavy-duty and timeless. We cut and weld wrought iron railings in our Phoenix shop. Powder coat keeps it sealed and low maintenance. Used often for classic or Southwest-style staircases.

Composite

We use composite mostly on exterior stair rails. Comes pre-colored, reinforced with steel where needed. Drilled and fitted for cable infill. Clients love it for low upkeep—no sanding, no sealing.

Stainless Steel

Top-tier option for modern stair railings. Marine-grade stainless steel won’t rust, even when staircases are exposed to water or sun. Brushed or polished finishes available. We’ve done these in ultra-modern builds and even some poolside stairs with interior access.

Galvanized Steel

Galvanized is tough and built for hard use. We use it when budget’s a factor but strength still matters—garage stairs, exterior steps, or utility areas. We often coat it after install for aesthetics.

Wood

Most often used for the top rail, but occasionally posts too. Oak, redwood, walnut, or ipe—cut, sanded, and sealed to fit the job. Adds warmth and comfort to otherwise sharp-lined metal or cable systems.

Where You’ll See Stair Railings in Phoenix

Interior Staircases—Modern homes in Chandler use stair railings with cable or vertical pickets to keep spaces open. We mount into tread plates, floor beams, or stringers based on the structure.

Exterior Front Steps—We install these with steel or composite posts anchored into concrete. Usually powder-coated, sometimes with a wood cap for visual warmth.

Garage Entry Stairs—Short and simple, but still important. Galvanized steel or painted square tube rail with clean lines. No fuss, just function.

Lofts and Landings—Interior stair rail often wraps right into a loft guardrail. We match materials and spacing to make it feel continuous.

Backyard Steps or Pool Access—Yes, you need rail here too. We’ve installed cable and aluminum systems that meet code and still look sharp.

Phoenix Cable Railing Design Ideas for Custom Homes

Natural Wood with Black Cable for a Warm Entry

We built this stair rail near Hamilton High—oak cap, black posts, and brushed stainless cable. Gave a bright entryway just the right mix of modern and cozy.

Radius Cable Rail with Clear Coated Steel

A curved staircase off Alma School had dark wood treads and white walls. We built a rail that hugged the shape exactly, sealed the steel clear so the raw finish showed through.

Glass + Cable Hybrid for Loft Overlook

In a Fulton Ranch custom, we combined cable infill below a glass-paneled top section. Posts were matte black steel. The whole stair/loft combo felt like it floated.

High-End Cable Railing Builders in Phoenix – Art Meets Metal

Building railings isn’t just about safety—it’s about craft. At Scottsdale Railing and Gate LLC, we fabricate every part by hand in our Phoenix shop. We’re not buying prefab kits or slapping on brackets. We measure, cut, weld, and grind everything ourselves, then install it with care. That’s why high-end homeowners and builders across Chandler trust us with their stair railings. We don’t just check boxes—we build something that fits the home, holds strong, and looks like it belongs there. Clean welds. Tight lines. No guesswork.

Common Questions Locals Ask About Cable Railings

What are cable railings?
Cable railings use tensioned steel cables instead of pickets or glass to create a barrier that keeps the space open while still safe and secure.

What materials are they made from?
They’re made from stainless steel cable, anchored into posts made of steel, aluminum, wood, or composite. Top rails vary—some folks go with wood, others choose metal or composite.

Where are they most commonly installed in Phoenix?
You’ll see them on staircases, decks, balconies, and around pool areas. In Chandler, they’re especially popular inside modern two-story homes and for backyard steps leading to patios.

Phoenix Neighborhoods with Cable Railings

We’ve installed stair and cable railing systems all over Phoenix—North Central, South Mountain, Arcadia, Roosevelt Row, and Midtown. In Arcadia, homeowners tend to favor black powder-coated posts with wood top rails. In Roosevelt Row, modern lofts use vertical cable and recessed mount hardware for a sleek, minimal look. South Phoenix remodels often get galvanized steel with horizontal bar infill for something stronger and more utilitarian.

Down in Chandler, we’ve worked in Fulton Ranch, Ocotillo, The Islands, Chandler Heights, and Springfield Lakes. Each home has its own style—some clients go modern with clean steel and cable, others want warmer materials like wood and bronze hardware. We’ve built stair railing systems that blend right into reclaimed wood floors, follow curved staircases, and wrap into second-floor lofts like they were part of the original build. Every job’s a little different, and that’s exactly how we like it.

Scottsdale Railing and Gate LLC
Phone: 978-360-0060