Chandler Railing Company – Custom Steel And Cable Projects Stair Builder

Chandler Railing Company for Custom Cable, Metal & Stair Railings Built Locally

Chandler Railing Company Scottsdale Railing and Gate LLC is a Phoenix-based metal fabrication shop serving Chandler and the surrounding East Valley. We design, build, and install custom cable, stair, and metal railings for homeowners, architects, and builders who want it done right the first time. Folks call us when they’re tired of half-baked prefab kits and just want solid, clean, welded railings that fit their space and hold up in this wild Arizona weather.

Local Railing Builder for Cable Railings in Phoenix

You ever drive through Ocotillo and spot those modern homes with rooftop patios and killer lake views? One of those has a cable railing system we built last year. Brushed stainless cables with powder-coated steel posts in charcoal gray, finished with a smooth oak top rail. It keeps the view open but still safe for the grandkids. That spot bakes in direct sun all day, so we used 316-grade stainless fittings, sealed every anchor, and powder-coated the posts in-house at our Phoenix shop. We bolted them straight into a concrete deck using wedge anchors and torqued every fitting to spec. Clean lines, zero flex. That’s how a Phoenix railing contractor gets it done.

Popular Cable Railing Styles by Phoenix Contractors

Matte Black Steel Frame with Horizontal Cable
This is the classic. We’ve built a ton of these in Chandler Heights. It’s modern, strong, and shows off your yard instead of hiding it behind thick posts.

Wood Top Rail with Brushed Cable Infill
Warm and welcoming. Perfect for homes in Old Town Chandler. We match the top rail to the home’s trim and let the steel posts fade into the background.

Vertical Cable Systems
A little more modern. We’ve done this style in Fulton Ranch—vertical drops instead of horizontal runs. Needs precise tensioning, but the end result is clean and unique.

Interior Cable Rail for Floating Stairs
Slick stuff. Cables run between treads, sometimes without visible posts. We’ve done a few of these in downtown Chandler condos—modern, minimal, tight as a drum.

Cable + Glass Combo
Want ultra-minimal? This is it. We’ve installed systems like this near Chandler Fashion Center where the cable runs behind clear glass—barely there but super secure.

Rust Patina Steel with Cable Infill
Natural steel, left to oxidize, sealed after. It’s gritty and beautiful. Fits well in desert-modern homes south of the 202.

Aluminum Cable Posts with Composite Top Rail
Lightweight and weatherproof. Good choice for folks near Sun Groves or Springfield Lakes who don’t want to deal with upkeep.

Double Top Rail Balcony Railing
Extra structure up top means extra peace of mind. We did one like this overlooking the golf course in Ironwood—tight fit, solid feel, and still stylish.

Cable Inside Timber Frames
Post and beam homes out by Chandler Heights Rd? This is your style. Cable between chunky cedar or fir posts. Strong, warm, and weather-smart.

Thin-Post Cable for Rooftop Terraces
We’ve built these for homes with upstairs patios in downtown Chandler—posts as thin as code allows, cable pulled laser-straight. Clean, airy, and barely noticeable.

Cable Railing Materials – What Phoenix Contractors Use

Aluminum

We bring in aluminum extrusions from local suppliers and cut them to spec in our shop. They’re lightweight, rustproof, and great for poolside use or sun-soaked balconies. We drill and fit stainless cable tensioners right through them. Finish options range from matte black to white to bronze. Pros: zero maintenance, no rust, easy to work with. Cons: less structural beef than steel. We recommend it for lighter-duty projects or exposed locations.

Wrought Iron

Old-school and heavy. This is what we use when strength matters most. We fabricate it from raw stock in our Phoenix shop. Cable passes through drilled holes or anchor plates. Finish usually involves a high-temp powder coat, sometimes black, sometimes with texture. It’s not going anywhere—but it needs upkeep. Best for homes that want a traditional or industrial edge.

Composite

Usually made from recycled plastics and wood fibers. We use composite mainly for posts, and we reinforce them inside before drilling cable holes. It’s paint-free, splinter-free, and handles sun well. We’ve used it on back patios in Chandler’s family neighborhoods. It won’t win any awards for looks, but it holds up.

Stainless Steel

The gold standard for cable railings. We use marine-grade 316 stainless for cables, tensioners, and sometimes the posts. It shines (literally) and holds tension like nothing else. Great in sun, rain, wind—you name it. We install it with exact spacing and torque. Looks sharp, lasts forever, and doesn’t need paint. You’ll find this in high-end homes from Ocotillo to North Phoenix.

Galvanized Steel

Hot-dipped, rugged, and a bit gritty. We use this when budget matters more than polish. It gets coated in zinc for corrosion resistance. We still powder-coat it, but the finish has a more industrial vibe. It’s tough stuff, just not fancy. Great for side-yard stairs, service areas, or back patios.

Wood

We mill wood top rails for most of our systems. Oak, ipe, and redwood are the usual suspects. Sanded, sealed, and mounted clean. Adds warmth to cable’s cold edge. We bolt wood over metal posts or use it with composite frames. Needs care every couple years, but man, it feels good under your hand.

Where You’ll See Cable Railings in Phoenix

Staircases—We mount cable railings directly into stair stringers, inside or out. Especially common in custom homes near Arcadia or the historic districts. Posts need angle cuts and careful layout.

Decks—Homes with second-floor decks in neighborhoods like Chandler Heights and Desert Breeze use cable for the view. We space posts wide and tension cables tight so they don’t sag in the heat.

Balconies—We’ve done a lot of these for townhomes and single-families in Ocotillo. The trick is anchoring well into concrete or engineered framing. Wind and sun are no joke up there.

Pool Areas—Cable works great for pool surrounds. Doesn’t block sightlines or airflow. We usually use stainless with aluminum posts and anchor it deep for safety compliance.

Lofts—Downtown Phoenix lofts and Chandler urban infills both use cable to open up the space. We anchor straight to subfloors or steel beams. Minimal impact, max function.

Phoenix Cable Railing Design Ideas for Custom Homes

Chandler Lakeside Deck with Cable + Wood

We did a lakefront deck off Ocotillo with cedar top rails and stainless cable. Looked right at home next to the water. Posts got sealed against splashback, and we added extra bracing for the breeze.

All-White Cable Stair for a Bright Interior

Built for a custom builder near Warner and Alma School—white powder-coated posts, white oak top rail, and brushed cable. Fit perfectly with the homeowner’s clean aesthetic. Soft light bounced off it beautifully.

Cable Railing with Stone Columns in the Foothills

Client had stacked stone columns built first, and we built a cable span to stretch between them. Stainless cable + raw desert materials = total harmony. Felt grounded and modern.

High-End Cable Railing Builders in Phoenix – Art Meets Metal

The best cable railings don’t scream for attention—they just feel right. That takes more than cutting metal. It takes precision, experience, and a little artistic grit. At Scottsdale Railing and Gate LLC, we handle everything ourselves—from raw stock to final install. We build in Phoenix, weld to spec, test every fitting, and leave the site cleaner than we found it. That’s why custom builders and high-end homeowners across Chandler call us. We aren’t just installers. We’re builders. Fabricators. Problem-solvers with grinders in one hand and tape measures in the other. Our railings look clean because they are clean—from the inside out.

Common Questions Locals Ask About Cable Railings

What are cable railings?
Cable railings use steel cables under tension instead of pickets or glass. They’re modern, open, and super durable. Great for views, airflow, and that minimal Arizona vibe.

What materials are they made from?
Usually stainless steel for the cable, with posts made from steel, aluminum, composite, or wood. Top rails can be wood or metal, depending on the look.

Where are they most commonly installed in Phoenix?
You’ll find cable railings on decks, balconies, pool enclosures, and staircases—especially in homes with views or open-concept layouts. They’re all over Chandler, from newer builds to remodels.

Phoenix Neighborhoods with Cable Railings

We’ve done cable railing installs across Phoenix, from high-end builds in Arcadia to townhomes off Central Ave. In Roosevelt Row, we used thin stainless posts and internal cable runs for modern lofts. Over in Moon Valley, we went full stainless on a wraparound deck overlooking the desert wash. Chandler’s no different—Ocotillo homes usually go for brushed stainless and wood combos. Chandler Heights favors darker powder-coated posts with composite accents.

We’ve installed rooftop cable systems near Downtown Chandler, pool railings in Sun Groves, and staircases in Andersen Springs. Every job’s a little different, but the goal’s the same—keep the space open, safe, and built to last in this dry desert air.

Scottsdale Railing and Gate LLC
Phone: 978-360-0060