Scottsdale Railing Contractor
Scottsdale Railing Contractor for Custom Cable, Metal & Stair Railings Built Locally
Scottsdale Railing Contractor — that’s us. At Scottsdale Railing and Gate LLC, we’re a Phoenix-based crew specializing in custom metal, cable, and stair railings that hold up in this desert sun and look sharp doing it. We work across the Valley, building strong, sleek railings for homeowners who want something safe, good-looking, and built by folks who know their way around a welding torch. Locals count on us for one big reason: we actually build it here, install it ourselves, and don’t leave until it’s perfect.
Local Railing Builder for Cable Railings in Phoenix
A few months back, we finished a cable railing project on a hillside home in Ahwatukee, right near South Mountain Park. The view was killer, and the homeowners didn’t want a bulky railing blocking it — cable railings were the perfect fit. We went with stainless steel cables and a powder-coated black metal frame. The way the sun hits that combo around 6 PM? Unreal. No rust, no wobble, and clean lines that make the whole balcony look like it floats. That job’s why we love being a Phoenix railing contractor — we get to build stuff that fits the desert, holds up in the heat, and still makes folks say, “Damn, that’s nice.”
Popular Cable Railing Styles by Phoenix Contractors
Horizontal Cable with Square Posts
This one’s the bread and butter. Tight horizontal runs with square tubing posts — clean, simple, modern. Welded on-site by a metal fabricator.
Cable Rail with Wood Top Rail
Best of both worlds. Metal post structure with a smooth hardwood cap — think ipe or redwood. Adds warmth up top while keeping that steel strength below.
Vertical Cable Railings
Not as common, but sharp when done right. Cables run top-to-bottom. Great for staircases in tight spaces. Needs precision during install — not a job for a rookie.
Frameless Cable Rail
Minimalist dream. Usually uses side-mounted hardware and tensioning systems — no bulky frame. Installed mostly on decks with killer views.
Black Cable Rail with Stainless Cable
Contrast makes this one pop. Powder-coated black metal posts paired with silver stainless cables — looks sharp against stone or stucco walls.
Curved Cable Railings
Yep, we do curves. Takes custom bending of the top rail and exact measuring for the cable runs. Adds motion to patios and staircases.
Glass + Cable Combo
A hybrid look. Glass at the bottom, cables on top. Used for balconies where wind’s a factor but you still want visibility.
Rustic Cable Rail with Raw Steel
We leave the welds exposed, don’t powder coat, let it weather naturally. Not for everyone, but some folks love the industrial vibe.
Top Rail-Only Mounts
Posts just along the top rail, nothing below. Clean and floating. Needs thicker cables and top bracing. Installed carefully to meet code.
Cable with Decorative Caps or Finials
Adds a bit of flair to the ends. We’ve done copper, brushed aluminum, even custom-logo caps. Small detail, big effect.
Cable Railing Materials – What Phoenix Contractors Use
Aluminum
Lightweight and won’t rust — perfect for backyards with irrigation or pool mist. We order it pre-fab or custom-cut it ourselves. After install, it’s powder-coated any color. It’s solid, but not as rigid as steel, so we reinforce where needed. Good for balconies and walkways.
Stainless Steel
The go-to for cable runs. We use marine-grade 316 stainless that won’t corrode in the heat. Comes in rolls, then we tension it on-site with hidden fittings. When finished, it’s nearly invisible — makes the desert view the star. Not cheap, but it’ll outlive your house.
Wrought Iron
Heavy, classic, and a beast to work with. We forge it in our shop, then weld it in place. You won’t find cable rails only in wrought iron, but we’ll use iron posts and mix in the cable for that old-meets-new look. Needs sealing to prevent rust.
Powder-Coated Steel
Strong and reliable. We fabricate these posts in our Scottsdale shop, powder coat them to match your house, then bolt or weld them on-site. You’ll see these everywhere in Paradise Valley and Arcadia.
Composite Posts
Usually used with decks, especially if you’re already using composite decking. We’ll sleeve steel or aluminum inside for strength, then wrap with composite. Not everyone’s thing, but it blends nicely if you want less metal.
Where You’ll See Cable Railings in Phoenix
Cable railings show up in all kinds of spots around here. Stairs inside homes? We tighten the cables just right to keep things safe for kids, and adjust spacing to pass code. Pool decks — we make sure to use non-corrosive posts and ground everything properly. Balconies? That’s where they shine. For patios near Camelback Mountain, we use low-profile cables so the mountain’s always in view. Rooftop decks — especially in downtown condos — we anchor deeper to deal with wind. And in new builds, we’ll pre-plan the post placements with the GC so everything lines up perfect.
Phoenix Cable Railing Design Ideas for Custom Homes
Desert Minimalist with Open Views
We built one in Desert Ridge where the homeowners wanted “barely there.” Used stainless cable with low-profile metal posts in taupe. Fit the sand-colored stone walls and the palo verde trees out back like it was always meant to be there.
Mid-Century Cable + Wood Blend
A house over in Encanto-Palmcroft got a railing that matched their 60s vibe. Brushed steel posts, walnut top rail, and wide cable spacing. The whole thing looked like Frank Lloyd Wright had a say in it.
Mountain Modern Curves
North Scottsdale — big home with a spiral staircase. We custom-bent a curved handrail, ran cables that matched the arc, and gave the whole thing a graphite powder coat. You’d swear it came out of a gallery.
High-End Cable Railing Builders in Phoenix – Art Meets Metal
Some folks think of railing contractors as just installers. But the good ones? They’re artists with a welder. Every bend, weld, and cable tension is deliberate. That’s how we do it at Scottsdale Railing and Gate LLC. We don’t ship in kits. We build custom here, test it in the shop, and tweak it until it’s just right. Our clients trust us because we sweat the details — everything from post spacing to how that last bolt lines up with the tile grout. That’s what separates a big-box install from a true local build.
Common Questions Locals Ask About Cable Railings
Cable railings use thin metal cables instead of thick pickets or panels. They’re usually made from stainless steel, run horizontally or vertically, and tensioned between posts. We build the posts from steel, aluminum, or wood. Around Phoenix, you’ll see them most on balconies, decks, rooftop patios, and modern staircases. They’re popular because they let you see through — especially nice if you’ve got a view or want a cleaner look inside.
Phoenix Neighborhoods with Cable Railings
You’ll spot cable railings all over Arcadia — especially on new builds with rooftop terraces and wraparound decks. In Paradise Valley, we’ve done custom curved railings for driveways and hillside balconies. Central Phoenix, especially around Roosevelt Row, has cable railings inside modern townhomes. Out in Ahwatukee and South Mountain, they show up on backyard patios with big desert views. We’ve also been called out to Deer Valley, Biltmore, and Moon Valley — each one gets a different style depending on the home’s vibe.
Scottsdale Railing and Gate LLC
Phone: 978-360-0060
